
Add to Cart
PG Standard Plastic PA66 Cable Gland Electrical Wire with silicone rubber
Product material: nylon PA66
Specifications for screw teeth: M, PG, NPT, G
Usually called nylon cable fixed head, nylon cable waterproof gland, forced cable clamping gland, plastic waterproof connector, cable waterproof thread buckle, PG nylon cable fixed gland, M type waterproof connector, MG nylon waterproof cable gland metric tooth M, conforming to EU specification.
Product performance: waterproof, dustproof and corrosion resistance. The diameter of the clamping hose is large and the tensile strength is strong. Under the condition of reasonable use of products, the waterproof level can reach IP68. This product can be waterproof, dustproof, corrosion resistant, high hardness, and can work in damp, salt / acid / alkaline environment.
Item | Range (mm) | GL Thread Length (mm) | AG Thread O.D. (mm) | Spanner size (mm) | Code |
PG7 | 3-6.5 | 9 | 12.5 | 18/16 | HX-NLPG7 |
PG9 | 4-8 | 9 | 15.2 | 22/19 | HX-NLPG9 |
PG11 | 5-10 | 9 | 18.6 | 24/22 | HX-NLPG11 |
PG13.5 | 6-11 | 10 | 20.4 | 27/24 | HX-NLPG13.5 |
PG16 | 10-13 | 10 | 22.5 | 30/27 | HX-NLPG16 |
PG21 | 13-18 | 12 | 28.3 | 35/33 | HX-NLPG21 |
PG29 | 18-25 | 12 | 37 | 45/42 | HX-NLPG29 |
PG36 | 22-32 | 15 | 47 | 58/52 | HX-NLPG36 |
PG42 | 32-38 | 18 | 54 | 62/58 | HX-NLPG42 |
PG48 | 37-44 | 18 | 59.3 | 70/64 | HX-NLPG48 |
PG-Lengthen | |||||
Item | Range (mm) | GL Thread Length (mm) | AG Thread O.D. (mm) | Spanner size (mm) | Code |
PG7 | 3-6.5 | 15 | 12.5 | 18/16 | HX-NLPG7L |
PG9 | 4-8 | 15 | 15.2 | 22/19 | HX-NLPG9L |
PG11 | 5-10 | 15 | 18.6 | 24/22 | HX-NLPG11L |
PG13.5 | 6-11 | 15 | 20.4 | 27/24 | HX-NLPG13.5L |
PG16 | 10-13 | 15 | 22.5 | 30/27 | HX-NLPG16L |
PG21 | 13-18 | 15 | 28.3 | 35/33 | HX-NLPG21L |
PG29 | 18-25 | 15 | 37 | 45/42 | HX-NLPG29L |
PG36 | 22-32 | 18 | 47 | 58/52 | HX-NLPG36L |
PG42 | 32-38 | 20 | 54 | 62/58 | HX-NLPG42L |
PG48 | 37-44 | 20 | 59.3 | 70/64 | HX-NLPG48L |
Usage:
1. nylon cable waterproof connector is a supporting article for cables, which is mainly used in distribution boxes and distribution cabinets.
The connector can lock the cable, and the other end can be connected to the upper part of the equipment box body, or can be threaded according to the selection.
3. connect to electric equipment with internal threads at the inlet and outlet. General machinery control box, distribution board, machinery.
4. when used for fixing wires and cables, it can effectively clamp cables and achieve the purpose of waterproof.
5. according to the installation materials produced, they can be divided into heat shrink type ( the most commonly used type ), dry wrap type, epoxy resin pouring type and cold shrink type.
6. according to the core material, it can be divided into copper core power cable connector and aluminum core power cable connector.
7. the main function is to keep the line unobstructed, keep the cable sealed, and ensure the insulation grade at the cable joint, so as to ensure its safe and reliable operation. If the seal is not good, it will not only cause the oil-immersed paper to dry up due to oil leakage, but also moisture will invade the inside of the cable, which will reduce the insulation performance of the paper.
Company advantages:
1. specializing in the production of cable connectors for 12 years, we specializes in R & D and launch various new products, and have many patented products.
2. automatic production of numerical control equipment, accurate and safe
3. 2011 years become Liaoning "aircraft carrier" special waterproof connector supplier