YUEQING HONGXIANG CONNECTOR MANUFACTURING CO.,LTD.
YUEQING HONGXIANG CONNECTOR MANUFACTURING CO.,LTD.
Add to Cart
Mini Heat Gun Hot Sale 2000W Two Air Flow Rate For Cable Gland
Specification
EU: 230V / 50Hz / 2000W
NA: 120V / 60Hz / 12.5A
Temperature Ⅰ/Ⅱ: 25/350/600℃
Air Flow Rate Ⅰ/Ⅱ: 500/300/500 L/min
Logistics Data
Color box: 44.5*29*50.5 cm
QTY / CTN: 10 pcs
Gross Weight: 11.8
Net Weight: 11kg
Usage notes
1. Do not use the heat gun with a chemical (plastic) scraper.
2. Please remove the dry paint of the nozzle or scraper after use to avoid fire.
3. Please use it in a well ventilated area, as the residue removed from the paint of the lead product is toxic.
4. Do not use the heat gun as a hair dryer.
5. Do not direct the hot air to people or animals.
6. When the heat gun is used or just after use, do not touch the nozzle. The handle of the heat gun must be kept dry, clean and away from oil or gas.
7. The heat gun must be completely cooled before it can be stored.
Operating instructions for heat guns
1. Be sure to ground reliably before use to prevent static electricity from damaging the components.
2. It should be adjusted to the appropriate temperature and air volume, and the temperature and air volume of the heat gun should be adjusted according to the shape and working requirements of different nozzles; the desoldering time of small components such as resistors and capacitors is about 5 seconds, and the general IC desoldering time is 15 About seconds, the small BGA desoldering time is about 30 seconds, and the big BGA desoldering time is about 50 seconds. (For example, when the white light 850B hot air gun uses the A1130 nozzle, the air volume is adjusted to 1st gear, and the temperature is adjusted to 3.5 gears; when the nozzle is not used, the air volume is adjusted to 4 gears. The temperature is adjusted to 4 speeds. The digital display type ATTEN850D uses the A1130 nozzle to adjust the air volume to 3 speeds and the temperature to 350 degrees; when the nozzle is not used, the air volume is adjusted to 4.5 speeds and the temperature is adjusted to 380 degrees).
3. When the power switch is turned on, the hot air gun should be preheated until the temperature is stable, and the welding can be carried out. When using the soldering iron part, the untouchable components should be uniformly heated at 1~2CM above the component; during the desoldering process, pay attention to protect the peripheral components. Security.
4. Do not use too much force when installing the nozzle. Do not hit the workbench with a soldering iron to give a strong impact to avoid damage to the heating wire and high temperature glass.
5. Be very careful in high temperature operation. Do not use hot air gun near flammable gas or flammable objects. Pay attention to personal safety, replace parts, leave power and wait for it to cool. Do not pull out the power plug for a long time.
6. When the work is completed, turn off the power switch. At this time, the automatic cooling period starts, and the power plug cannot be pulled out during the cooling period.
Company profile
Hongxiang - waterproof joint with high cost performance.The road is the place where you walk, and pioneering and innovating are as usual.Yueqing hongxiang connector manufacturing co., ltd. is a professional manufacturer of various specifications of wire and cable connectors. The main product is a metal cable waterproof connector with a protection grade of ip68. it has the characteristics of large clamping cable range, strong tensile force, waterproof, dustproof, salt resistance, acid and alkali resistance, alcohol resistance, grease and common solvents, etc. Other products include anti-electromagnetic cable connector, porous cable waterproof connector, marine stuffing box, reducer head, brass plug cap, etc.
